Keep your cameras. Keep your recorder.

Rikuy talks to the recorder you already have, on your store's own network, through the Rikuy Bridge. No new cameras, no ports to open on your router. We check your model before you pay.

Check your cameras Start free

ch 04 · coolers · via ISAPI

Bridge found on your network

8 ch

DS-7608NI · clock +2 s · audio dropped

Built first for the recorders small stores already own

RTSP cameras: live view only

Check your cameras in ten seconds.

Pick the brand on your recorder and type the model from its label. Your agent can do the same check for you with one call.

1 · Brand on the recorder

2 · Model on the label Recorder model

Not sure? Send your agent a photo of the label, or ask it to run check_cameras.

First at launch Hikvision family

Hikvision recorders

methodISAPI, Hikvision's HTTP API, plus RTSP playback live frameYes, from the main or sub stream recordedSearch and clips by time range turn onISAPI and RTSP, a Rikuy user

We confirm before you pay. During the private demo we check every recorder with you on a call.

// your agent can call this, no account needed
{"tool": "check_cameras",
 "arguments": {"brand": "hikvision", "model": "DS-7608NI"}}
→ {"supported": true, "method": "isapi"}

Setup guide for Hikvision

Compatibility, family by family.

Hikvision and Dahua make about a third of the world's cameras and build for many other labels. One driver covers a whole family.

family	brands on the label	method	live frame	recorded search and clips	status
	Hikvision, Annke, Ezviz, LTS	ISAPI + RTSP	Yes	Yes	First at launch
	Dahua, Lorex, Amcrest	CGI + RTSP	Yes	Yes	First at launch
	Reolink, wired and plug-in Wi-Fi	api.cgi	Yes	Yes	After launch
	Any camera with RTSP or ONVIF Profile S	RTSP · ONVIF S	Yes	Not yet	Live view only
Swann, Uniview	Swann, Uniview	to confirm	To test	To test	v2
Cloud cameras	Ring, Wyze, battery cameras	cloud API	Not in v1	Not in v1	later

Reolink battery cameras only stream through Reolink's Home Hub. Models are tested in our lab, starting with a used Hikvision NVR and a used Dahua DVR; each brand page lists what we are testing.

What your recorder needs. Three settings, ten minutes.

A user just for Rikuy

Create a low-privilege user on the recorder. Its password is encrypted on the Bridge and never travels or sits in plain text.

The right door open

Turn on ISAPI and RTSP on Hikvision, or CGI and RTSP on Dahua. ONVIF users come off by default on both; the setup guide shows where.

Plain H.264

Switch off "smart" codecs like H.264+ so recorded clips cut cleanly. Everything else on your recorder stays as it is.

ports opened on your router. The Bridge only dials out, encrypted, on port 443.

seconds of audio. The Bridge drops the audio track at the source.

1 or 2

playbacks at a time per recorder, so your own use never slows down.

60 s

clock drift and we tell you. Every frame carries the recorder time and the corrected time.

Not on the list? Tell us the model.

We are in private demo with Florida stores. Send us the brand and model on your recorder and we will tell you how Rikuy would connect.

Check your cameras Start free